Setup

Recording ››
Parent Previous Next

Click the Cog Button next to Record from the Main Window to bring up the Recording Setup window.



These settings will need to be configured before starting a recording.


Some video formats do not support partial recordings in the event of a power outage or system failure.
Read about Fault Tolerant recordings here


AVI

       

Filename


File to save the recording to.


System


Frame rate of the recording. (Set this to match the Frame Rate set under the Display tab under Settings)


Codec


Codec to use when recording.

For SD recordings the DV Video Encoder is recommended.

For HD recordings the MJPEG Encoder or MagicYUV codecs are recommended and come built in to vMix
3rd party codecs such as CineForm or HQX can also be used


File Format


AVI: Standard AVI file
MKV: The MKV file format supports partial recordings that can be recovered in the event of a power outage or system failure.


Audio


Enable audio on this recording.


Audio Delay


This sets a delay on the audio input in milliseconds. For example if the audio is earlier than the video by 200ms, type in 200 here.


New File Every

Automatically start a new recording every x minutes.
Each file is split seamlessly to enable easy editing.


FFMPEG


FFMPEG is an open source encoding tool that provides the ability to record to a number of formats including MPG, TS, MP4, MOV and MXF.

Codec
Select the recording format to use out of MPEG-2, MP4 X264 with AAC audio and VC-3

Format
Depending on the codec a number of file formats will be available.
MXF or the MOV/MP4 non-Indexed formats are recommended as they support file recovery in the event of a power or system failure.



MP4


      MP4 creates a video file containing H264 video and AAC audio.
      Due to the complexity of H264 compression, this option requires a faster processor for optimal performance.


      Bit Rate

      Select the Bit Rate for the H264 video stream in Mbps (Megabits per second). 25 is recommended for high quality HD (similar to AVCHD)


      Audio Bit Rate

      Select the Audio Bit Rate for the AAC audio stream in Kbps (Kilobits per second). A maximum of 192kbps can be selected. 128kbps is the default.



Windows 7 File Size
MP4 recordings have a maximum file size limit of 4GB under Windows 7.
For larger recordings, choose a different recording format or upgrade to Windows 8.

       

MPEG-2


    Options are the same as above but with the following additional settings:


    Bit Rate


    Specify the Bit Rate for the MPEG-2 recording in Mbps (Megabits per second). 8 is recommended for SD, 25 for HD.


    File Format


    Specify either Program Stream (MPG) or Transport Stream (TS)

    Transport Stream is recommended if the video will be edited by a program such as Sony Vegas.



WMV / WMV Streaming


HTTP Port (Streaming only)


Port that Windows Media Player can connect to to view the stream.


Width/Height


Width/Height of the WMV recording


Bitrate


Bitrate of the WMV recording


FPS


Frames Per Second


Quality


Quality from 1 to 100. 100 is the highest quality.


Codec


WMV codec to use. WMV1 is the fastest but the lowest quality. WMV3 is the slowest with the highest quality.


Audio Compression


WMV Audio Format to use