« Back to Knowledge Base

Setting up CasparCG with NDI to send the output to vMix

The following guide is for configuring CasparCG with NDI support so that the output shows up as an NDI source within vMix.
1. Install CasparCG Server

2. Install NewTek Network Video Send Driver

3. Apply for and install the NewTek AirSend Updater
4. Edit the casparcg.config in Notepad adding the following to <channel><consumers> 
5. Run CasparCG and the output will be available as an NDI source in vMix labelled as "1"

Last Updated: Friday, 17 February 2017 2:11:22 PM